Tablet Capping & Lamination: Causes, Prevention, and Romaco’s Role in Perfecting Tablet Production

Tablet production is a cornerstone of the pharmaceutical industry, ensuring the delivery of essential medications. However, this process often faces challenges that can significantly impact product quality and production efficiency. Tablet capping and lamination are two common issues that can arise during manufacturing. Romaco has dedicated itself to addressing these challenges through innovative solutions.

Understanding Tablet Capping and Lamination

Tablet capping occurs when the top or bottom portion of a tablet separates from the main body. Lamination, on the other hand, is characterized by the splitting of a tablet into layers. Lamination is the precursor of capping. Both issues can be caused by a variety of factors, e.g.:

Air entrapment

When air becomes trapped within the tablet formulation during the compression process, it can create localized areas of weakness that can cause the tablet to separate or delaminate.

Ingredients with high elastic properties

Certain materials can exhibit elasticity, making them more susceptible to deformation during compression and potentially leading to capping or lamination.

High compression forces or insufficient dwell time

Excessive pre- or main-compression forces or insufficient dwell time can result in over compaction of the powder, making the tablet susceptible to delamination.

Worn tooling

When the punches and dies become worn, they can no longer provide the precise and consistent pressure required for optimal tablet formation.

These issues can have negative consequences, such as reduced tablet quality, and decreased production efficiency.

The Challenges of Tablet Production

The following special challenges must be considered during the production process regarding to capping or lamination:

Capping or lamination during compression or ejection

The tablet may separate during the compression process or when it’s ejected from the press.

Short pressure dwell times

Insufficient dwell time can lead to incomplete compaction and increased risk of capping or lamination.

High rates of damaged tablets

Capping and lamination can result in a significant number of defective tablets, affecting overall yield.

Implications of low tablet hardness and inadequate bonding

Insufficient tablet hardness and poor bonding can increase the likelihood of capping and lamination.

Strategies to encounter capping and lamination issues

By following these strategies, manufacturers can achieve reduced capping and lamination issues, increased yield, productivity, and product quality. Additionally, mechanical wear on tablet presses and tooling can be reduced:

Reduction of penetration depth

Reducing the penetration depth of the punches helps ensure better powder compaction and reduced risk of delamination.

Conical die openings

Dies with conical openings can improve deaeration during compression, preventing air pockets that can contribute to capping.

Specialized tooling

Larger punch heads and other specialized tooling can enhance compression and reduce the likelihood of capping.

Reduced pre- and main-compression force

Lower compression forces can reduce the stress concentration at the tablet’s edges and potential weak points. This can help prevent the tablet from fracturing or delaminating.

Extended dwell time

Adjusting process speed can extend the dwell time, allowing for better compaction and reduced risk of capping.

The Role of Romaco’s KiTech Laboratory

Romaco’s KiTech laboratory plays a crucial role in addressing capping and lamination challenges. This state-of-the-art facility offers:

Customized trials

Manufacturers can conduct customized trials to evaluate the effectiveness of Romaco’s solutions for their specific applications.

Speed demonstrations

Romaco can demonstrate the speed and efficiency of its equipment, helping manufacturers optimize their production processes.

Process analysis

The KiTech laboratory can analyze existing tableting processes to identify areas for improvement and recommend appropriate solutions.

By collaborating with the KiTech laboratory, manufacturers can gain valuable insights and develop tailored strategies to overcome capping and lamination challenges.

Successful Applications of Romaco Solutions

Romaco offers a range of products suitable for addressing capping and lamination issues, including the Kilian KTP 420X, KTP 590X, and KTP 720X. These machines are designed for both mono-layer and bi-layer tablet production and have been successfully implemented in various manufacturing environments.

Conclusion

Preventing capping and lamination is essential for ensuring the success of tablet production. Romaco has established itself as a leader in providing innovative solutions to address these challenges. Through its advanced technology, customized services, and a commitment to quality, Romaco helps manufacturers achieve optimal tablet production results.

About Romaco Contact us